What to describe
Property type (home or business), how many coverage areas (driveway, entry points, yard, interior), and whether you have existing cameras or alarm systems.
Specialist Electrical Support
Camera installation, cable runs, power supply, and system setup for homes and businesses — weatherproof, properly wired, phone app configured, and backed by a workmanship guarantee. Written quotes before work starts.

AB Electrical
Licensed since 1988
Tell us about the property and coverage areas — we will reply with a site assessment plan and a written quote.
Property type (home or business), how many coverage areas (driveway, entry points, yard, interior), and whether you have existing cameras or alarm systems.
An overview of the property from the street, photos of the areas you want covered, and any existing camera positions or cable runs. Phone snaps are fine.
A site assessment plan with camera positions and cable routing, plus a written quote with the total price confirmed before any work begins.
A camera system is only as reliable as the electrical work behind it. Most CCTV failures on the Central Coast have nothing to do with the cameras themselves — they are caused by poorly run cables, waterproof joints that were not actually waterproof, power supplies that were never rated for outdoor use, or PoE injectors that fail the first time a storm puts real load on the circuit. Electrical installation is the unglamorous but decisive part of a camera system.
Getting the electrical side right means cameras that stay online in rain and heat, clean cable runs that are hidden properly, reliable power to every device, and a recorder that has its own protected supply. Doing this well at install time is dramatically cheaper than retrofitting it later.

Camera system faults almost always trace back to the electrical side rather than the cameras themselves. Here is what to watch for.
Experience, licensing, local coverage, and clear advice matter most when electrical work needs to be done properly.
Most CCTV failures are caused by poor cable runs and inadequate power supply, not camera quality. Abbass personally plans every installation to ensure clean cabling, weatherproof connections, and reliable power — so your cameras stay online.
If something is not right, we come back and make it right at no extra charge. Cameras tested, cable runs inspected, and phone app access confirmed before handover.
Every CCTV installation is quoted in writing with a coverage plan, camera positions, and cable routing confirmed before any work begins.
Central Coast conditions — salt air, storms, humidity — require proper weatherproofing at every junction and camera mount. AB Electrical uses weatherproof fittings and concealed cable runs as standard.
5 out of 5 stars
“The team was always on time and super professional.”
5 out of 5 stars
“Thanks great service”
AB Electrical handles the electrical side of CCTV and security system installations on the Central Coast — power, cable runs, weatherproofing, and integration with the rest of the property's electrical system. Every install is planned so the system stays online through storms, heat, and daily use.
For existing systems showing the warning signs above, AB Electrical is regularly called in to fix the electrical work behind a camera install that was treated purely as a surveillance job the first time around.

CCTV pricing depends heavily on the number of cameras, cable runs, and the site. The ranges below are realistic Central Coast figures for the electrical side of the install — every job is confirmed in writing before work starts.
4-camera residential CCTV install (electrical only)
$900 – $1,800
8-camera install for larger home or small business
$1,800 – $3,600
Adding a single extra camera to an existing system
$280 – $520
Repair or replace a faulty camera power supply
$180 – $380
Retrofit cable management on an existing system
$300 – $900
| Job | Typical range |
|---|---|
| 4-camera residential CCTV install (electrical only) | $900 – $1,800 |
| 8-camera install for larger home or small business | $1,800 – $3,600 |
| Adding a single extra camera to an existing system | $280 – $520 |
| Repair or replace a faulty camera power supply | $180 – $380 |
| Retrofit cable management on an existing system | $300 – $900 |
All figures are indicative. Every job is quoted before work starts.
A typical CCTV install starts with a walkthrough to confirm where cameras will provide genuinely useful coverage (rather than just filling in corners). AB Electrical plans the cable runs, installs the power supplies and cameras, terminates everything cleanly, and tests the system end-to-end so the customer sees the live feed before the job is closed.
Cable management and weatherproofing get the same attention as the rest of the electrical work on the job.
Identify coverage, blind spots, and cable routes.
Cleanest route for each camera, hidden wherever possible.
Cameras, power supplies, and recorder installed with proper weatherproofing.
End-to-end system test with the customer watching the live feed.
It depends on the property. AB Electrical does a site assessment to plan coverage of entry points, driveways, and blind spots. A typical Central Coast home uses 4 cameras; a small business uses 6 to 8. The coverage plan is confirmed in writing before any work begins.
Either way works. AB Electrical can source and supply cameras and an NVR as a complete package, or install equipment you have already purchased. If you are unsure what to buy, we recommend options that suit the site and the budget.
Wired (PoE or direct power) is more reliable and is what AB Electrical recommends for permanent installations. Wireless cameras are an option where cable runs are impractical, but wired systems deliver better uptime and picture quality, especially in Central Coast weather conditions.
Yes. Phone app setup and remote viewing configuration is included in every CCTV installation. AB Electrical configures the app, tests the connection, and walks you through how to use it before leaving the site.
Yes. AB Electrical handles the electrical integration between CCTV and intruder alarm systems, including shared power supply, cabling, and monitoring connections. Both systems can be planned and installed together for cleaner cabling and lower total cost.
A typical 4-camera residential installation on the Central Coast runs $900 to $1,800 depending on camera quality, cable routing complexity, and whether PoE or local power is used. An 8-camera system runs $1,800 to $3,600. Every job is quoted in writing before work starts.
Most camera failures are power or cable faults, not camera hardware. AB Electrical's clean cable runs and weatherproof connections are designed to prevent this. If a camera does go offline, a diagnostic visit identifies and fixes the cause — usually in a single visit.
If the work is slightly different, these services are usually the closest match.
Insured Central Coast commercial electrician for offices, retail, hospitality, strata, and small industrial sites — after-hours work, compliance certificates supplied, and account terms available.
Expert LED lighting upgrades, installations, and design guidance for Central Coast homes and businesses — indoor, outdoor, kitchen, bathroom, and feature lighting with dimmer compatibility and a workmanship guarantee.
Licensed intruder alarm installation, panel upgrades, zone expansions, and existing system repairs for Central Coast homes and businesses — properly wired, backup power tested, written quotes before work starts.
AB Electrical also handles this work across key Central Coast suburbs.
Gosford, Central Coast NSW 2250
Erina, Central Coast NSW 2250
West Gosford, Central Coast NSW 2250
Tuggerah, Central Coast NSW 2259
Wyong, Central Coast NSW 2259
Warnervale, Central Coast NSW 2259
East Gosford, Central Coast NSW 2250
Narara, Central Coast NSW 2250
Wyoming, Central Coast NSW 2250
Terrigal, Central Coast NSW 2260
Wamberal, Central Coast NSW 2260
Avoca Beach, Central Coast NSW 2251
We will plan the camera layout, confirm cable routing and power supply, and send a written quote — no obligation.