What to describe
Whether this is for a rental property, a pre-settlement requirement, or a home upgrade. Include the number of bedrooms and levels, and whether any alarms are currently installed.
Core Electrical Service
NSW-compliant interconnected photoelectric smoke alarms for rental properties, owner-occupied homes, and pre-settlement compliance — compliance certificates supplied, written quotes before work starts.

AB Electrical
Compliance certificates supplied
Tell us the property type and number of bedrooms — we will confirm the compliance requirements, quote the work in writing, and supply the certificate on installation day.
Whether this is for a rental property, a pre-settlement requirement, or a home upgrade. Include the number of bedrooms and levels, and whether any alarms are currently installed.
The property address, whether you need the compliance certificate for a property manager or solicitor, and any settlement or tenancy start date you are working toward.
A written quote with the number of alarms, placement, and price confirmed. Compliance certificate supplied on installation day — typically within a few days of the enquiry.
Smoke alarms are the cheapest and most effective piece of life-safety equipment in any home — and they are the most commonly overlooked. NSW law requires a working smoke alarm on every level of a residential building, and for rental properties the compliance requirements are stricter still. A dead battery, a unit past its expiry date, or an alarm installed in the wrong location can turn a life-saving device into an ornament.
Modern NSW guidance leans strongly toward photoelectric, interconnected, mains-powered smoke alarms with a 10-year sealed battery. Interconnection matters more than most people realise: when one alarm detects smoke, every alarm in the property sounds, which is the difference between waking up to a fire at the other end of the house and not waking up at all.

Smoke alarm issues tend to cluster around a few symptoms — and every one of them is worth a same-week fix rather than letting it wait.
Experience, licensing, local coverage, and clear advice matter most when electrical work needs to be done properly.
Abbass, a licensed Central Coast electrician, handles every smoke alarm job personally. Compliance certificates are issued on installation day and sent directly to the landlord or property manager.
If something is not right, we come back and make it right at no extra charge. All alarms tested, interconnection confirmed, and compliance documentation supplied at completion.
Every install uses modern photoelectric, interconnected alarms with sealed 10-year batteries — meeting current NSW requirements for both owner-occupied and rental properties.
Every smoke alarm job is quoted in writing before any work begins. Landlord compliance inspections and reports are quoted separately where needed.
36 reviews with a 5 average rating on Google.
5 out of 5 stars
“Power went out across half the house during a storm. AB Electrical came out the same evening, found the fault in the switchboard, and had everything back on within two hours. Good communication throughout and fair pricing for after-hours work.”
Michael T.
Emergency Electrician
5 out of 5 stars
“Smelled burning near a powerpoint and called AB straight away. They talked me through turning off the circuit over the phone and were at the house within 40 minutes. Turned out to be a loose connection arcing behind the wall plate. Fixed properly and checked the rest of the circuit too.”
Rachel D.
Emergency Electrician
5 out of 5 stars
“Called at 10pm on a Sunday after the safety switch kept tripping. AB Electrical was on-site fast, diagnosed a faulty appliance on the circuit, and made sure everything was safe before leaving. Professional and no fuss.”
Steve L.
Emergency Electrician
AB Electrical handles the full smoke alarm lifecycle on the Central Coast — installation, replacement, compliance inspection, and rental documentation. Every install uses modern photoelectric, interconnected, mains-powered alarms with a 10-year sealed battery, matching current NSW guidance.
For landlords and property managers, the visit includes the compliance paperwork rental properties actually need — not just the physical install.

Smoke alarm pricing depends on the number of units, whether they are being interconnected, and whether new wiring is required. The ranges below are realistic Central Coast figures — every visit is confirmed in writing before work starts.
Replace a single alarm (like-for-like)
$150 – $260
Install a new mains-powered photoelectric alarm
$220 – $380
Full compliant install (3-bedroom home, interconnected)
$750 – $1,400
Landlord compliance inspection and report
$150 – $280
Battery / alarm service on existing fleet
$120 – $220
| Job | Typical range |
|---|---|
| Replace a single alarm (like-for-like) | $150 – $260 |
| Install a new mains-powered photoelectric alarm | $220 – $380 |
| Full compliant install (3-bedroom home, interconnected) | $750 – $1,400 |
| Landlord compliance inspection and report | $150 – $280 |
| Battery / alarm service on existing fleet | $120 – $220 |
All figures are indicative. Every job is quoted before work starts.
A typical smoke alarm job is a single site visit that covers the install, the testing, and the compliance paperwork. For a standard home, the whole job usually takes between one and three hours.
The homeowner ends up with alarms that interconnect, a test record, and a clear explanation of what needs to happen at the 10-year expiry mark.
Confirm coverage requirements per level, including garages and hallways.
Fit photoelectric, interconnected, mains-powered alarms with sealed 10-year batteries.
Trigger one alarm to confirm every alarm in the property sounds.
Leave the customer with a test record and any landlord documentation.
NSW requires photoelectric smoke alarms that are interconnected so that when one alarm detects smoke, all alarms in the property sound. Mains-powered alarms with a sealed 10-year lithium battery are preferred for new installations. Ionisation-only alarms are no longer recommended because they are slower to respond to smouldering fires.
Yes in most residential properties. NSW requires interconnected alarms so all units in the property activate together when one detects smoke. This is the difference between waking up to a fire at the other end of the house and not waking up at all. AB Electrical installs interconnected systems as standard.
Smoke alarms have a 10-year life from the date of manufacture. After 10 years the sensor degrades and the alarm must be replaced — even if it still beeps when tested. The manufacture date is printed on the back of the unit. AB Electrical checks the date during every smoke alarm visit.
Yes. A compliance certificate is issued on the same day as the installation and sent directly to the landlord or property manager. AB Electrical also provides documentation suitable for rental records, insurance, and council requirements.
Yes. Pre-settlement smoke alarm compliance is a common job. AB Electrical can typically complete the work within a few days of the enquiry, with the compliance certificate supplied the same day as the installation so settlement is not held up.
NSW requires a working smoke alarm on every level of a residential building, in hallways or areas leading to bedrooms, and in each bedroom for rental properties depending on the tenancy agreement date. AB Electrical assesses the property and confirms the correct placement during the quote visit.
A typical 3-bedroom Central Coast home with interconnected photoelectric alarms runs $750 to $1,400 depending on the number of alarms, whether existing wiring is in place, and ceiling access. Single alarm replacements are $150 to $260. Every job is quoted in writing before work starts.
If the work is slightly different, these services are usually the closest match.
24/7 emergency electrician services across the Central Coast for urgent faults, outages, sparking fittings, and electrical safety issues.
Residential electrical services across the Central Coast for repairs, upgrades, installations, safety work, and general home electrical improvements.
Switchboard upgrades, safety switch (RCD) installations, and circuit expansions for Central Coast homes, businesses, and older properties — written quotes before work starts, typical one-day installation.
AB Electrical also handles this work across key Central Coast suburbs.
Gosford in the Gosford central hub and surrounding mixed-use suburbs
Erina in the Gosford central hub and surrounding mixed-use suburbs
Wyoming in the Narara Valley family-home suburbs
Umina Beach in the Peninsula towns and beachside suburbs
Tuggerah in the Wyong inland service corridor
Warnervale in the Warnervale growth corridor
East Gosford in the Gosford central hub and surrounding mixed-use suburbs
West Gosford in the Gosford central hub and surrounding mixed-use suburbs
Narara in the Narara Valley family-home suburbs
Terrigal in the southern beach corridor
Wamberal in the southern beach corridor
Avoca Beach in the southern beach corridor
We will confirm the compliance requirements, quote the work in writing, and supply the compliance certificate on installation day — no obligation.